Configure meet me for cisco callmanager

Unified Communications Manager: Configure Meet−me conferences require that a range of directory numbers be allocated for exclusive use. The CUCM supports hardware and software conference bridges. When a meet -me conference is set up, the conference controller chooses a DN and advertises it to members Cisco CallManager Attendant Console Server. "How to configure Meet-Me video conference with PIN? that we only consider Cisco Unified Communications Manager Enterprise or Cisco.

This parameter determines how an ad hoc conference terminates. This is an important toll-fraud prevention setting, because inside facilitators can set up a conference call to expensive international numbers and then drop out of the call. Without the conference controller, international tariffs are billed back to the company in which the conference call was set up.

Valid values are as follows: The conference remains active after the conference controller and all on-net parties hang up. This default setting could result in potential toll fraud. Terminate the conference when the conference controller hangs up. Terminate the conference when there are no on-net parties remaining in the conference. This distinction is important because the conference controller might have to drop out of the call, but other business partners on the call should continue the conference.

The When Conference Controller Leaves option would hang up the call when the conference controller left the conference. This parameter determines whether advanced ad hoc conference features are enabled. Advanced ad hoc conference features include the ability for conference participants other than the conference controller to add new participants to an existing ad hoc conference conference chaining ; the ability for any noncontroller conference participant to drop other participants from the conference via the ConfList and RmLstC softkeys; and whether ad hoc conferences can be linked using features such as conference, join, direct transfer, and transfer.

configure meet me for cisco callmanager

Valid values specify True allow advanced ad hoc conference features or False. The default is False. This parameter determines whether more than two ad hoc conferences can be linked directly to an ad hoc conference in a nonlinear fashion.

Nonlinear conference linking occurs when three or more ad hoc conferences are linked directly to one other ad hoc conference. Linear conference linking occurs when one or two ad hoc conferences are linked directly to one other ad hoc conference.

Valid values specify True allow nonlinear conference linking so that three or more ad hoc conferences can be linked to a single other conference or False. This parameter specifies the maximum number of participants who are allowed in a single ad hoc conference. The maximum number of conference bridge participants for typical conference bridges follow: Setting this value above the maximum capacity of the conference resource will result in failed entrance to a conference bridge if more ports than the specific conference bridge configuration allows are added.

All Possible Ways to Set Up PIN for CUCM Meet-Me Conference

The range is 3 to The default is 4. This parameter specifies the maximum number of participants that are allowed in a single meet-me conference. A software conference bridge is capable of conferencing up to participants.

When a conference is created, the system automatically reserves a minimum of three streams, so specifying a value less than 3 allows a maximum of three participants.

configure meet me for cisco callmanager

The range is 1 to Configure the new pattern with the following data: Enter a meet-me number or number range. Enter up to 30 alphanumeric characters for a description of the meet-me number.

Section 6 2 MeetMe Conference using CUCM and Unity Connection

Choose the minimum meet-me conference security level for this meet-me number or pattern from the drop-down list: Figure shows a meet-me range of numbers beginning with and ending with The numbers are not in a partition, which will allow any phone to set up a meet-me bridge by clicking the Meet-Me softkey and dialing one of the numbers in the meet-me number range. Subsequent meeting members will need to dial only the number of the bridge.

The conference controller could be given access to the ConfList softkey, which will allow the controller to view the conference participants by caller ID information. The conference controller can individually remove users, but the conference controller does not have access to the users' line state information. Cisco MeetingPlace and MeetingPlace Express allow the conference controller to see which conference participant has a phone on hold.

The users call the directory number to join the conference. Anyone who calls the directory number while the conference is active joins the conference. This situation applies only when the maximum number of participants that is specified for that conference type is not exceeded and when sufficient streams are available on the conference device.

When you press Meet-Me on the phone in order to initiate a meet-me conference, Cisco Unified Communications Manager considers you the conference controller. The conference controller provides the directory number for the conference to all attendees, who can then dial that directory number to join the conference.

If other participants in a meet-me conference press Meet-Me and the same directory number for the conference bridge, the Cisco Unified Communications Manager ignores the signals. The conference bridge for a meet-me conference is allocated on the basis of the configured Media Resource Group List MRGL for the endpoint that initiates the conference. Cisco Unified Communications Manager does not take into account whether the conference initiator is video-capable to allocate a conference bridge for meet-me conference calls.

It is also important to consider that any conference resources that are not added to a media resource group becomes a part of the default MRGL and therefore, available for everyone's use. Increasing Number of Meet-Me Participants or Sessions Complete these steps in order to increase the number of participants or sessions for a meet-me conference on Cisco Unified Communications Manager.

Choose the publisher server from the Server drop-down list. Choose Cisco call manager service from the Service drop-down list.

Conferencing - Cisco Unified - Cisco Certified Expert

You can increase or decrease the meet-me sessions for the conference. For example, a software conference bridge conferences up to participants. When a conference is created, the system automatically reserves a minimum of three streams. If you specify a value less than three, it allows a maximum of three.